published date : mar 19 .2008 drawing no : sdsa2805 v3 checked : b. l.liu p.1/4 part number: LUR56D t-1 3/4 (5mm) solid state lamp www.sunled.com part number emitting color emitting material lens-color luminous intensity (if=10ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. LUR56D red gaasp/gap red diffused 12 19 627 60 features z low profile. z low power consumption. z long life - solid state reliability. z reliable and rugged. z rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0. 01") unless otherwise noted. 3.specifications are subject to change without notice. absolute maximum ratings (t a =25c ) ur (gaasp/gap) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 160 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 storage temperature tstg -40 ~ +85 lead solder temperature [2mm below package base] 260c for 3 seconds c lead solder temperature [5mm below package base] 260c for 5 seconds ur (gaasp/gap) unit forward voltage (typ.) (i f =10ma) v f 1.9 v forward voltage (max.) (i f =10ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =10ma) p 627 nm wavelength of dominant emission (typ.) (i f =10ma) d 625 nm spectral line full width at half-maximum (typ.) (i f =10ma) ? 45 nm capacitance (v f =0v, f=1mhz) c 15 pf operating characteristics (t a =25c )
published date : mar 19 .2008 drawing no : sdsa2805 v3 checked : b. l.liu p.2/4 part number: LUR56D t-1 3/4 (5mm) solid state lamp www.sunled.com ? ur
published date : mar 19 .2008 drawing no : sdsa2805 v3 checked : b. l.liu p.3/4 part number: LUR56D t-1 3/4 (5mm) solid state lamp www.sunled.com remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity/ luminous flux or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity/ luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : mar 19 .2008 drawing no : sdsa2805 v3 checked : b. l.liu p.4/4 part number: LUR56D t-1 3/4 (5mm) solid state lamp www.sunled.com packing & label specifications LUR56D
|